* USED * Jony Jib 2 Bundle PB
CONDITION: Good. Item shows wear- it was used within our in house rental studio. Despite appearance, item was maintained to insure consistent performance.
It is designed for use with film and DSLR cameras weighing up to 30 lbs.
Camera height ( at full assembly ) would max at 15 feet, with a working extension reaching 10 feet
* PLEASE NOTE: This item is PICK-UP ONLY at our Aurora, IL location.
JIB AND MAIN ASSEMBLY INCLUDES:
* USED * Jony Jib 2
Includes four modular sections total, consisting of (1) 84" and (3) 36" mast tubes. Use all the tubes or modify reach as needed depending on the project and gear.
Note that hardware assembly will affect the maximum mast tube size. Full extension would run about 10 feet. Tubes are designed to nest within each other, allowing for easy storage and transport
* USED * Jony Jib 2 100mm Mounting Hub
100mm half-ball that mounts to the included tripod described below.
* USED * Jony Jib Motorhead HD
Motorized Pan and Tilt Head for cameras up to 30 lbs. Includes a wired controller that attaches toward the back of the jib.
* USED * Rear Control Center and Weight Bar
Features a horizontal bar to mount controls, as well as a bar for weight plates (included, described below) for counterbalance.
* USED * Jony Jib Vertical Brake ( JJ VB )
Provides a vertical lock for the mast. Ideal when doing stop motion or other tasks where the mast must stay in place.
* USED * Jony Jib Power Distribution Box ( JJ VB )
Passive box that mounts near the rear of the jib that receives 12 volts from a power supply via 4-pin XLR female. Provides 3 XLR 4-pin power taps and one coaxial 2.1mm power tap.
* USED * Jony Jib Wiring Kit
* USED * Assorted weight plates:
(4) - 25 lbs, (5) - 5 lbs, (3) - 2 1/2 lbs
* USED * Jony Jib Case Motorhead HD
Custom Pelican 1650 case with custom foam inserts and external wheels.
Store and transport the Motorhead HD pan and tilt head, zoom and focus control as well as cables and accessories. Case empty is 34 lbs, and also features the ability to be padlocked. Dimensions 33" x 21" x 12"
* USED * Jony Jib Case JJ2 Hard
Custom Case Cruzer case with custom foam inserts and external wheels. Weight range full loaded is between 18 to 70 lbs. Dimensions are 53" x 18" x 6". Weight empty is 24 lbs.
USED ITEM NOTICE
This is a used item and includes everything that is photographed in this listing and nothing more. Used items include a 30 Day Warranty. All used item sales are final unless found to be defective or stated to be a sold AS-IS item. If your equipment fails due to normal use, please contact our customer support department so that we can assist you. We will repair or replace the equipment at our discretion. In some situations we may choose to refund the purchase price of the item. This warranty does not cover intentional or accidental handling, abuse or neglect. There is no express or implied warranty beyond what is stated. This warranty is not transferable.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
CONDITION: Good. Item shows wear- it was used within our in house rental studio. Despite appearance, item was maintained to insure consistent performance.
It is designed for use with film and DSLR cameras weighing up to 30 lbs.
Camera height ( at full assembly ) would max at 15 feet, with a working extension reaching 10 feet
* PLEASE NOTE: This item is PICK-UP ONLY at our Aurora, IL location.
JIB AND MAIN ASSEMBLY INCLUDES:
* USED * Jony Jib 2
Includes four modular sections total, consisting of (1) 84" and (3) 36" mast tubes. Use all the tubes or modify reach as needed depending on the project and gear.
Note that hardware assembly will affect the maximum mast tube size. Full extension would run about 10 feet. Tubes are designed to nest within each other, allowing for easy storage and transport
* USED * Jony Jib 2 100mm Mounting Hub
100mm half-ball that mounts to the included tripod described below.
* USED * Jony Jib Motorhead HD
Motorized Pan and Tilt Head for cameras up to 30 lbs. Includes a wired controller that attaches toward the back of the jib.
* USED * Rear Control Center and Weight Bar
Features a horizontal bar to mount controls, as well as a bar for weight plates (included, described below) for counterbalance.
* USED * Jony Jib Vertical Brake ( JJ VB )
Provides a vertical lock for the mast. Ideal when doing stop motion or other tasks where the mast must stay in place.
* USED * Jony Jib Power Distribution Box ( JJ VB )
Passive box that mounts near the rear of the jib that receives 12 volts from a power supply via 4-pin XLR female. Provides 3 XLR 4-pin power taps and one coaxial 2.1mm power tap.
* USED * Jony Jib Wiring Kit
* USED * Assorted weight plates:
(4) - 25 lbs, (5) - 5 lbs, (3) - 2 1/2 lbs
* USED * Jony Jib Case Motorhead HD
Custom Pelican 1650 case with custom foam inserts and external wheels.
Store and transport the Motorhead HD pan and tilt head, zoom and focus control as well as cables and accessories. Case empty is 34 lbs, and also features the ability to be padlocked. Dimensions 33" x 21" x 12"
* USED * Jony Jib Case JJ2 Hard
Custom Case Cruzer case with custom foam inserts and external wheels. Weight range full loaded is between 18 to 70 lbs. Dimensions are 53" x 18" x 6". Weight empty is 24 lbs.
USED ITEM NOTICE
This is a used item and includes everything that is photographed in this listing and nothing more. Used items include a 30 Day Warranty. All used item sales are final unless found to be defective or stated to be a sold AS-IS item. If your equipment fails due to normal use, please contact our customer support department so that we can assist you. We will repair or replace the equipment at our discretion. In some situations we may choose to refund the purchase price of the item. This warranty does not cover intentional or accidental handling, abuse or neglect. There is no express or implied warranty beyond what is stated. This warranty is not transferable.
